AREAS OF USAGE

Line traps are used in transmission and distribution networks and they are the key components in PLC (Power Line Carrier) systems used remote control signals, voice communication, remote metering and control between substations in the electrical T&D networks. Line traps are used for preventing high frequency signals from going towards undesired directions.

 

MEDIUOM VOLTAGE NSPB

  • Standard : IEC 60353
  • Manufactured as per desired short circuit capacit
  • Light weight provides ease of mounting
  • Cooling spacers provides lower winding temperature
  • Ease of changing tuning box without dismantling the coil when tuning frequency changes are necessary
  • Availability of installation on capacitive voltage transformers, support insulators or suspension mounting
  • Low stray capacitance and high quality factor (Q)
  • Low, high and double bandwidth
  • Overvoltage protection againist short circuit conditions
  • Provision for nearly every type of conductor terminal

                  

 

DIMENSIONS

 

 

BAND LIMITS OF WIDE BAND LINE TRAPS

 

 

BLOCKING BANDWITHS OF TUNING DEVICE

SELECTING DETAILS

  • Inductance of Line Trap (mH)
  • Nominal Current (A) (at 50 veya 60 Hz)
  • Short Circuit Current (kA) (for one second)
  • Blocking frequency range (kHz)
  • Network voltage (kV)
  • Blocking impedance (ohm) Zb
  • Resistive component of blocking impedance (ohm) Rb
  • Capacitive voltage transformer mounting provision (pedestal)
  • Connection terminal special requriements (on demand)
  • Bird barrier